LeEco Le 1s vs Xiaomi Redmi 3

General

  • Model
    LeEco Le 1s Xiaomi Redmi 3

Display

  • Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor)
    FHD IPS capacitive touch screen IPS LCD capacitive touchscreen
  • Size
    5.5 inches 5
  • Resolution
    FHD 1920x1080 pixels 720x1280 Pixels, 24 bit color depth
  • Pixel Density Pixel Density (PPI) is refers to the concentration of pixels on a particular display, measured in pixels per inch (ppi). Pixel density is calculated by dividing the diagonal pixel resolution of a display by its diagonal size, higher pixel density better display quality.
    403 PPI 294 ppi
  • Display Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind.
    Gorilla Glass 3 No

Hardware

  • Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming.
    MediaTek Helio X10 Processor Qualcomm Snapdragon 616 MSM8939v2
  • Processor CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone.
    2.2 GHz, MTK MT6795T octa-core 64-bit Octa-Core 1.5 GHz Cortex A53
  • GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion.
    POWER VR G6200 Qualcomm Adreno 405
  • RAM RAM (Random Access Memory) is a type of computer memory that can be accessed randomly, any byte of memory can be accessed without touching the preceding bytes that allows information to be stored and accessed quickly from random locations. RAM is the most common type of memory found in computer systems, smartphones, tablets and other electronic devices.
    3 GB RAM 2GB RAM
  • Internal Storage Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored.
    32GB GB 16GB
  • Expandable memory Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras.
    NO Yes microSD Support up to 128GB
  • Fingerprint Scanner Fingerprint recognition or fingerprint authentication refers to the automated method of verifying a match between two human fingerprints. Fingerprints are one of many forms of bio metrics used to identify individuals and verify their identity.
  • Sound Sound is a vibration that propagates as a typically audible mechanical wave of pressure and displacement, through a medium such as air or water.
    Dolby,DTS
  • Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device.
    Mirror Surface Fingerprint ID , gravity sensor, IR distance sensor,Compass,Magnetometer,Proximity Sensor,Light Sensor Proximity sensor
    Accelerometer
    Ambient light sensor

Camera

  • Primary Camera is able to capture photographs and usually videos, The most important characteristics of a camera are the resolution (measured in megapixels), lens focus type (fixed or automatic), higher megapixel cameras are known to capture higher quality photos, but not always a good measurement of the photos quality.
    13MP 13 Megapixels
  • Video
    4K video Recording [email protected]
  • Camera Features
    PDAF camera
    Ball Bearing motor
    Close Loop
    Autofocus
    Geo tagging
    Face detection
    High Dynamic Range mode (HDR)
    Digital image stabilization
    Panorama
    Touch Focus
    White Balance
    ISO
    Self-Timer
    Scene Mode
    Exposure compensation
    Macro Mode
    5 element lens
  • Flash Flash Light => There is commonly two types of flash lights are used in camera mobile phones, LED Flash (LED flash offers lower power consumption with drive circuitry that takes up very little room, LEDs can be strobed faster than any other light source), Xenon Flash (xenon flash produces an extremely intense full-spectrum white light for a very short duration)
    Yes LED Flash
  • Front Camera
    5 MP 5 Megapixels

Network

  • SIM SIM (Subscriber Identity Module) is a small card that contains mobile network subscriber's account information. This allows the phone using the card to attach to a mobile network. The SIM card is most commonly associated with GSM and UMTS mobile networks. Moving a SIM card from one phone to another allows a subscriber to switch mobile phones without having to contact their mobile network carrier. SIM cards can also be used by a phone to store limited amounts of data, such as phone numbers and text messages.
    Micro SIM Micro SIM
  • 3G Network
    WCDMA: 850/900/1900/2100MHz HSDPA 850 / 1900 / 2100
    TD-SCDMA
    CDMA2000 1xEV-DO
  • 4G Network
    FDD LTE: B1/B3/B7
    TDD LTE:B38/B39/B40/B41
    LTE band 1(2100), 3(1800), 7(2600), 38(2600), 39(1900), 40(2300), 41(2500)

Connectivity

  • Wi-fi Wi-Fi is a popular wireless networking technology using radio waves to provide high-speed network connections that allows devices to communicate without cords or cables, Wi-Fi is increasingly becoming the preferred mode of internet connectivity all over the world.
  • GPS GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky.
  • Bluetooth Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices.
  • Infrared Infrared connectivity is an old wireless technology used to connect two electronic devices. It uses a beam of infrared light to transmit information and so requires direct line of sight and operates only at close range.
  • NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches.
  • Wireless Charging Wireless Charging (Inductive Charging) uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device.

Pros & Cons

Search

Shares