Xiaomi Mi 5 vs LeEco Le Max 2

General

  • Model
    Mi-5 LeEco Le Max 2

Display

  • Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor)
    IPS LCD capacitive touchscreen, FHD IPS capacitive touch screen
  • Size
    5.2 inch 5.7 inches
  • Resolution
    Full-HD (1920x1080) 1440 x 2560 pixels
  • Pixel Density Pixel Density (PPI) is refers to the concentration of pixels on a particular display, measured in pixels per inch (ppi). Pixel density is calculated by dividing the diagonal pixel resolution of a display by its diagonal size, higher pixel density better display quality.
    554 ppi 515 PPI
  • Display Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind.
    Corning® Gorilla® Glass 4 Gorilla Glass 3

Hardware

  • Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming.
    Qualcomm® Snapdragon™ 820 Qualcomm Snapdragon 820 MSM8996
  • Processor CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone.
    Quad-core 2.2 GHz & quad-core 1.8 GHz Dual core, 2.15 GHz, Kryo + Dual core, 1.59 GHz, Kryo
  • GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion.
    Adreno 530 Adreno 530
  • RAM RAM (Random Access Memory) is a type of computer memory that can be accessed randomly, any byte of memory can be accessed without touching the preceding bytes that allows information to be stored and accessed quickly from random locations. RAM is the most common type of memory found in computer systems, smartphones, tablets and other electronic devices.
    4 GB RAM 3GB / 6 GB
  • Internal Storage Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored.
    32 GB / 64 GB 32GB / 64GB
  • Expandable memory Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras.
    No NO
  • Fingerprint Scanner Fingerprint recognition or fingerprint authentication refers to the automated method of verifying a match between two human fingerprints. Fingerprints are one of many forms of bio metrics used to identify individuals and verify their identity.
  • Sound Sound is a vibration that propagates as a typically audible mechanical wave of pressure and displacement, through a medium such as air or water.
    Normal stereo speakers -
  • Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device.
    Fingerprint (ultrasound), accelerometer, gyro, proximity, compass, barometer Tri-axial Gyroscope, Hall Sensor, Magnetometer, Gravity Sensor, Proximity Sensor, Light Sensor, Infrared Sensor, Fingerprint Sensor, Geo-magnetic, ALS, Sensor Hub, Fingerprint Sensor

Camera

  • Primary Camera is able to capture photographs and usually videos, The most important characteristics of a camera are the resolution (measured in megapixels), lens focus type (fixed or automatic), higher megapixel cameras are known to capture higher quality photos, but not always a good measurement of the photos quality.
    16 MP 21 MP
  • Video
    [email protected], [email protected], [email protected], HDR 3840x2160 @ 30 fps, 1920x1080 @ 60 fps, 1280x720 @ 120 fps
  • Camera Features
    Autofocus, OIS , Geo-tagging, touch focus, face/smile detection, panorama, HDR F2.0 Aperture, 1/2.4 inch Sensor Size, PDAF, Close Loop, Auto Focus, Manual Focus, HDR, Scene Mode, 4K Recording, Slow Motion Recording (720p at 120 fps), Optical Image Stabilization, BSI, CMOS Sensor, FOV 78.4
  • Flash Flash Light => There is commonly two types of flash lights are used in camera mobile phones, LED Flash (LED flash offers lower power consumption with drive circuitry that takes up very little room, LEDs can be strobed faster than any other light source), Xenon Flash (xenon flash produces an extremely intense full-spectrum white light for a very short duration)
    Yes , dual-LED flash Yes
  • Front Camera
    8 MP, 1080p 8 MP

Network

  • SIM SIM (Subscriber Identity Module) is a small card that contains mobile network subscriber's account information. This allows the phone using the card to attach to a mobile network. The SIM card is most commonly associated with GSM and UMTS mobile networks. Moving a SIM card from one phone to another allows a subscriber to switch mobile phones without having to contact their mobile network carrier. SIM cards can also be used by a phone to store limited amounts of data, such as phone numbers and text messages.
    Micro SIM Nano SIM
  • 3G Network
    UMTS/WCDMA: B1/2/4/5/6/8/9/19 850 / 900 / 1900 / 2100 MHz HSDPA
  • 4G Network
    LTE (FDD): B1/2/3/4/5/7/8/9/17/19/20/28 LTE - 1/2/3/4/5/7/8/12/17/20/25/26/38/39/40/41

Connectivity

  • Wi-fi Wi-Fi is a popular wireless networking technology using radio waves to provide high-speed network connections that allows devices to communicate without cords or cables, Wi-Fi is increasingly becoming the preferred mode of internet connectivity all over the world.
  • GPS GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky.
  • Bluetooth Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices.
  • Infrared Infrared connectivity is an old wireless technology used to connect two electronic devices. It uses a beam of infrared light to transmit information and so requires direct line of sight and operates only at close range.
  • NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches.
  • Wireless Charging Wireless Charging (Inductive Charging) uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device.

Pros & Cons

Search

Shares